About this item
The Falcon 650389 is the top latch case for Falcon (Monarch) surface-mounted vertical rod panic exit devices, covering the 19-V, 24-V, 25-V, and XX-V series. It's the replacement part you order when the top latching mechanism on a vertical rod exit device wears out, gets damaged, or stops latching reliably. The top latch case sits at the top of the door and houses the latch that the top vertical rod drives up into the top strike, so when this part fails, the door won't secure at the top. Replacing the 650389 brings the device back to proper operation without swapping out the whole exit device. It ships unfinished, and as a repair part it does not include mounting screws or fasteners.
What the top latch case does on a vertical rod device
A surface vertical rod exit device latches a door at two points: the top and the bottom. Push the touchbar and both rods retract at once, releasing the door. The top latch case is the assembly that does the latching at the top, the rod pushes into it, and it engages the top strike mounted in the frame. Over years of cycling, the latch case is one of the wear points, and a worn or damaged one is a common reason a vertical rod device stops latching at the top or feels sloppy. Since the latch case is a fraction of the cost of a complete exit device, replacing just this part is the practical fix when the rest of the device is still sound.
What it fits, and how to confirm
This is the part that matters most to get right, so confirm before ordering. The 650389 is the top latch case for Falcon Monarch surface vertical rod devices in the 19, 24, and 25 series, and the XX-V series. It also fits older 18 Series Monarch devices, which is useful because those older units are exactly the ones most likely to need a repair part now. To make sure it's the right component, check that your device is a surface-mounted vertical rod model (not a rim or concealed vertical rod device) and that it's a Falcon or Monarch unit in one of those series. The 24/25 Series service manual shows the full parts breakdown and where the top latch case sits in the assembly, and we can point you to it if you want to match the part visually before buying.
Falcon 650389 specifications
-
Type: Top latch case, replacement part for surface vertical rod panic exit devices.
-
Fits: Falcon (Monarch) 19-V, 24-V, 25-V, and XX-V series. Also fits older 18 Series Monarch devices.
-
Position: Top of door, drives into the top strike.
-
Material: Zinc base.
-
Finish: Unfinished.
-
Included: Latch case only. Mounting screws and fasteners not included.
Why order genuine Falcon parts
When you're repairing a panic exit device, using the correct manufacturer part matters, because exit devices are life-safety hardware governed by code and fire ratings. A genuine Falcon 650389 keeps the device operating the way it was listed and tested, which a generic substitute can't guarantee. Keeping the existing device and replacing the worn latch case is also the cost-effective route, you spend a fraction of a new device and keep the rest of the working hardware in place.
One thing to confirm before ordering: this is the top latch case for surface vertical rod devices. If your device latches differently, or you need the bottom bolt guide, rods, or cover kit, those are separate parts in the same series, and we can help you identify the right one.
Order the Falcon 650389 from American Locksets
We stock Falcon exit device parts from authorized distribution, so every part ships genuine with a real manufacturer warranty. Find rods, strikes, cover kits, and other components in the Falcon exit device accessories category, or browse all exit hardware.
Trusted Since 2001
.svg)
